Skip to content

Competence training · no card scheme

Training for the work people actually do

Work at height, mobile elevating work platforms, pallet trucks and prefabricated scaffold. Taught in English from a fixed syllabus, without an IPAF, PASMA or CISRS card — because UK law asks for competence, not a particular certificate.

Delivered at your workplace. Completion is recorded in HSEQ Nova.

Construction workers at a site entrance before starting work

Instruction before the job starts

HSWA section 2(2)(c): information, instruction, training and supervision.

HSWA 1974 s.2(2)(c)MHSWR 1999 reg. 13PUWER 1998 reg. 9Work at Height 2005

The catalogue

Courses we can deliver without a licensed approval

Each course follows a written syllabus: planning, the equipment, the limits, and what to do when something goes wrong. The employer still decides that the course fits the actual job.

Work at height and fall protection

Anyone who works where a fall could cause injury, and the people who plan that work.

Work at Height Regulations 2005; PPE at Work Regulations 1992

  • Planning the task and choosing collective protection before personal equipment
  • Forces, fall distances and the limits of a harness system
  • Selecting, fitting and using personal fall-protection equipment
  • Storage, maintenance and pre-use inspection
  • Tool tethering, so dropped objects are controlled
  • Rescue planning if someone is left suspended
  • Ladders and stepladders, including when they are the wrong choice

Mobile elevating work platforms

People who will operate a specific MEWP, and those who supervise that work.

PUWER 1998 reg. 9; LOLER 1998; Work at Height Regulations 2005

  • How the machine is built and how it moves
  • Stability, ground conditions and outriggers
  • Operating limits, wind and overhead hazards
  • Vertical platforms, boom lifts and vehicle-mounted platforms — matched to the machine in use
  • Pre-use checks, faults and how to report them
  • Safe use, including rescue from the platform

Pedestrian pallet trucks

People who move loads with a pedestrian pallet truck in a warehouse, yard or shop.

PUWER 1998 reg. 9

  • How the truck works and what it is rated to carry
  • Pre-use checks
  • Load handling, stacking and travelling with a load
  • Pedestrians, ramps, dock edges and other traffic
  • Common causes of pallet-truck accidents

Prefabricated scaffold, up to 5 metres

People who erect, alter or dismantle prefabricated system scaffold up to 5 metres.

Work at Height Regulations 2005; PUWER 1998

  • When prefabricated scaffold is the right access method
  • Components, ties and a stable foundation
  • Erecting, altering and dismantling in sequence
  • Inspection before use and after alteration
  • Stopping the work when the scaffold is incomplete

Prefabricated scaffold, 5 to 9 metres

People who already work on lower scaffold and will erect, alter or dismantle up to 9 metres.

Work at Height Regulations 2005; PUWER 1998

  • The extra stability and tying demands above 5 metres
  • Erecting, altering and dismantling in sequence
  • Edge protection and safe loading of the platform
  • Inspection and handover before anyone else uses it
  • What this course does not cover: scaffold above 9 metres

Work equipment safety

New starters and anyone who uses work equipment. Often taken before a machine-specific course.

HSWA 1974 s.2(2)(c); MHSWR 1999 reg. 13; PUWER 1998

  • What the employer must provide: information, instruction, training and supervision
  • Accidents, responsibility and what follows an injury
  • The environment around the job
  • Rules for using work equipment safely
  • Recognising hazardous-goods marks. This is awareness only, not ADR driver training

Health and safety for managers

Line managers and supervisors who organise the work and the people who do it.

HSWA 1974 s.2; MHSWR 1999

  • The employer’s duties and what a manager is expected to do day to day
  • Risk assessment and the arrangements that sit under the policy
  • Competence: who needs training, and how you know it is still current
  • Investigating incidents and acting on what they show
  • Consulting the people who do the work

How a course runs

From the job to a record you can show

01

Tell us the work

Which machines, which heights, and who will be in the room. We match the course to that work rather than a generic card category.

02

Train in English, on the job

Classroom and practical sessions at your workplace, using the equipment people will actually use.

03

Record who is competent

Each person who completes the course is recorded in HSEQ Nova, with a review date, so managers can see who is in date.

The limit of the catalogue

Competence training, not a card and not a licence

HSE does not approve a provider for these courses. A voluntary card can still be what a principal contractor asks for at the gate. If the site requires a named scheme, say so before you book — we will not dress this training up as that card.

Not in this catalogue
  • IPAF, PASMA, CISRS, RTITB, ITSSAR or CPCS cards
  • Crane operator certificates
  • Scaffold above 9 metres
  • Licensed asbestos work
  • ADR driver training or Driver CPC

Frequently asked questions

What the law requires, what a card scheme is, and what this training is not.

Do these courses need an approved training provider?

No. UK law does not licence a training body for work at height, MEWPs, pedestrian pallet trucks or prefabricated scaffold. The duty is to give suitable and sufficient training and to make sure people are competent — HSWA 1974 section 2(2)(c), the Management Regulations 1999 regulation 13, and PUWER 1998 regulation 9. HSE does not issue a licence for these courses, and a card scheme is not a legal requirement.

Is this an IPAF or PASMA card?

No. An IPAF PAL card and a PASMA certificate are voluntary industry schemes. They are one way to show competence. They are not what the Work at Height Regulations or PUWER require. This training is competence training for the equipment and the task. It does not issue an IPAF, PASMA or CISRS card.

Is there a forklift licence in this catalogue?

No. There is no forklift licence in UK law. The catalogue includes pedestrian pallet trucks only. Counterbalance and reach trucks are a separate decision for the employer, and this page does not offer them.

Why is scaffold limited to 9 metres?

The courses cover prefabricated system scaffold up to 5 metres, and from 5 to 9 metres. They do not cover scaffold above 9 metres. Above that height the work needs a different level of competence, and we do not offer it.

Who remains responsible after the course?

The employer does. Training does not transfer the duty. The employer must still decide that the training matches the machine, the site and the person, supervise the work, and keep the record. HSEQ Nova stores that record. It does not replace a competent person under the Management Regulations.

Can the record sit in HSEQ Nova?

Yes. Completed training is stored against the person, with the course and a review date. Managers see who is coming due. The software is the record. The course is delivered by a trainer.

Book training for your team

Tell us the machine, the height and the people

We will confirm which course fits, where it can be held, and how the completions are written into your training records.